TECHNICAL MORTAR

SKIM COAT SUPERFINE

White and Gray

Eurotiles Skimcoat Superfine is an innovative thin plastering mortar that covers pinholes and other finishing imperfections of concrete walls, columns, beams and ceilings.

  • Madaling ipahid at matipid gamitin

  • Hindi nagpupulbos at nagbibitak-bitak

  • Pang pantay sa mga butas-butas at bako-bakong pader

  • Pintura ay kapit na kapit

  • Maaaring pahiran ng anumang "brand" ng pintura

SkimCoat_front 1.png
TDS   /   MSDS

SKIM COAT ECO 100

Skimcoating Thickness 0.3-4mm

Eurotiles Skimcoat ECO is a smooth skin rendering liquid to be mixed with cement at thickness of 0.3 to 4mm for use to eliminate grooves, seams and rock pockets in concrete surface for a seamless smooth finish.

Uses:

  • ceilings from 0.3 to 4 mm thickness.can be applied to both interior and exterior walls and

  • Reinforced concrete

  • Pre-cast concrete panels

  • Traditional rendering mortars

  • Lightweight concrete or lightweight block

  • Fiber cement board

skim coat, skim coat ceiling, skim coat wall, skim coat over paint, skim coat concrete, skim coat
TDS   /   MSDS
 

SKIM COAT EXCEL 102

Ready-to-use Skimcoating (Thickness 0.3-4mm)

Eurotiles SkimCoat Excel is a ready-to-use smooth skim rendering paste for thickness 0.3-4mm used to level surface defects in concrete or render.

Uses:

can be applied on both interior and exterior walls and ceilings in a thickness of 0.3 to 4mm.
It can be applied on:                         Possible covering materials:

  • Lightweight concrete blocks             - thick plastic coating

  • Shuttered concrete                            - paint

  • Reinforced concrete                           - wallpaper

  • Precast concrete                                 - fabric

  • Concrete soffits                                  - bonded plastic coverings

  • Fiber cement board

skim coat, skim coat ceiling, skim coat wall, skim coat over paint, skim coat concrete, skim coat, skim coat paste
TDS   /   MSDS
 
 

PLASTER PATCH 104

Thin rendering mortar - Interior & exterior walls and ceilings

Eurotiles Plaster Patch is a fine rendering mortar with 2 mm to 10 mm thickness used for repairing surface defects on traditional renders or on the concrete panels of walls and/or ceilings.

Uses:

  • Reinforced concrete

  • Interior and exterior walls and ceilings with a thickness of 2mm to 10mm

  • Traditional renderings

  • Precast concrete panels

rendering mortar paste, rendering mortar, interior walls, exterior walls, rendering mortar, patch, cement patch
TDS   /   MSDS

QUICK LEVELER THIN 106

Self-leveling mortar for interior floors 3-8mm thickness

Eurotiles Quick Leveller Thin is a self-leveling ready to mix mortar for preparing substrate before laying thin-floor coverings in 3-8 mm thickness applications. It can be used on both old and new floors.

Uses:

  • Interior floors that require smooth and even surfaces

  • Permissible substrate: concrete slabs, mortar screed, pre-fabricated elements

  • Possible covering materials: vinyl sheeting, tiles, carpet, parquet, rubber, floor paints

leveling mortar, leveling motar mix, leveling mortar for floor, self leveling mortar, mortar leveling system, leveling mortar bed, leveling mortar for floor
TDS   /   MSDS
 
 

QUICK LEVELER THICK 108

Self-leveling mortar for interior and exterior floors 7-20mm thickness

Eurotiles Quick Leveller Thick is a ready to mix self-levelling screed used for preparing old and new interior and exterior floors before applying or laying vinyl sheets, tiles, carpet, parquet, rubber or floor paint. Its application thickness is 7mm-20 mm.

Uses:

  • Eurotiles Quick Leveller thick can be used for preparing old and new interior and exterior floors before applying or laying vinyl sheets, tiles, carpet, parquet, rubber or floor paint.

  • Permissible substrate: concrete slabs, mortar screed, pre-fabricated elements.

  • Possible covering materials: vinyl sheeting, tiles, carpet, parquet, rubber, floor paints

leveling mortar, leveling motar mix, leveling mortar for floor, self leveling mortar, mortar leveling system, leveling mortar bed, leveling mortar for floor
TDS   /   MSDS

Eurotiles Superior Tile Adhesive

STRUCTURAL REPAIR MORTAR 110

Fiber-reinforced non-shrink mortar

Eurotiles Structural Repair Mortar is a fiber-reinforced non-shrink mortar used for the repair of concrete structures and for the reinforcement of weakened structures with an application thickness of 2 mm to 35 mm.

Uses:

  • Repair of concrete surfaces: spalling, honeycombing, stairnosing, ramp, etc.

  • Concrete restructuring: pillars, slabs, posts, dam aprons and spillways

  • Reinforcement of weakened structures: balconies and cornices

  • Treatment of chambers and seams prior to waterproofing

non shrink mortar, non shrink mortar mix, non shrink repair mortar, non shrink cement mortar, structural repair mortar
TDS   /   MSDS
 

NON SHRINK GROUT (ANCHORING) 112

Balance shrinkage sealing mortar - High mechanical strength

Eurotiles Non-Shrink Grout Anchoring is a pre-mixed, cementitious, non-shrink high strength grout used for sealing and anchoring.

Uses:

  • Sealing of industrial equipment, construction of poles and columns, concrete rebars and bolts

  • Anchoring of steel bars

  • Underpinning works

  • Assembly of prefabricated and pre-stressed concrete equipment

  • Trench filling

  • Concrete works

  • Sealing concrete blocks/posts with micro-concrete

non shrink grout, non shrink grout uses, sealing mortar, sealing mortar, sealing mortar joints, sealing mortar mix, sealing mortar concrete
 

NON SHRINK GROUT (BEDDING) 114

Non-shrink, high strength structural grouting

Eurotiles Non-Shrink Grout is a high strength structural grout used most for grouting installations Gaseous expansion in the plastic states ensures positive contact and load transfer in grouting applications.

Uses:

  • Bedding from 10-50 mm thickness

  • In plastic consistency, fastening of steel bars, rods, connectors and anchor bolts

  • Bedding for equipment, support for heavy machinery and rails

  • Sealing of precast elements

  • 15-20 cm for micro concrete

  • Strengthening works

non shrink grout, non shrink grout uses, sealing mortar, sealing mortar, sealing mortar joints, sealing mortar mix, sealing mortar concrete
 

QUICK FIX 116

Non-shrinking fiber mortar fast hardening for roads and industrial floors

Eurotiles Quick Fix is a fast-setting repair mortar for roads and floors. It is easy to apply, has high mechanical sketch, has a fast hardening time, and is suitable for concrete roads, industrial floor repair, pot, etc.

Uses:

  • Fastening of sight holes, trapdoors frames, manhole covers, telecom hatches, signposts, street furniture, etc.

  • Use to repair concrete walkways and roads, potholes, industrial flooring, undercuts, etc.

  • Bed-face for high-traffic paving and road surfaces

quick fix, non shrink mortar, non shrink mortar mix, repair mortar, repair mortar mix, non shrink fill, fast hardening cement,
TDS   /   MSDS
 
CALL US

Tel: (02) 8635-2310 to 16 

Fax: (02) 8635-2317

EMAIL US
OFFICE HOURS

Mon - Sat: 9am - 6pm

Eurotiles Industrial Corporation, is one of the leading manufacturer of Philippine ceramic tiles that carry the brand name EUROTILES SUPERIOR CERAMIC TILES. ...

OUR PRODUCTS
Eurotiles Industrial Corporation

Unit 201 Prestige Tower, F. Ortigas Jr. Road

Ortigas Center, Pasig City, Philippines

(632) 635 2310 to 16

  • Facebook Social Icon
  • Twitter Social Icon
  • Instagram Social Icon
  • YouTube Social  Icon

© 2020 Eurotiles Construction Chemicals